|
The RM-9.2 is a new step into affordable high performance from Pro-Ject. This table is a mass loaded design with a thick acrylic platter and clamp assembly set on top of an inverted thrust bearing. This gives the table great speed stability as it raises the center of gravity of the rotating platter. To reduce motor noise, the motor is physically separated from the base and new opposing magnetic feet are employed. The tonearm is the new conical 9cc EVO carbon fiber arm tube with integrated headshell and superior bearing assembly resulting in the ability to use more massive and rigid (lower compliant) moving coil cartridges. A brass record clamp is included. 17.4”w x 7”h x 12.8”d. / 20.7”w x 11.4”h x 16.7”d (with optional dust cover).
SPECIALLY PRICED RM-9.2/PHONO CARTRIDGE PACKAGES
Pro-Ject RM-9.2: |
$2,749.00 |
with Sumiko Blue Point Special EVOIII...a $2,898 retail value |
|
Pro-Ject RM-9.2: |
$2,999.00 |
with Sumiko Blackbird...a $3,398 retail value! |
|
Pro-Ject RM-9.2: |
$3,999.00 |
with Sumiko Celebration II...a $4,499 retail value! |
| |
PLEASE
NOTE
The phono cartridge is NOT mounted on the tonearm
SPECIFICATIONS
| Nominal Speeds: |
33 / 45 rpm |
| Dustcover: |
Pro-Ject Cover It 2(Optional) |
| Record Clamp: |
Supplied |
| RCA Phono Jacks: |
Yes |
| Magnetically Supported Feet: |
Yes |
| Central Metal Block: |
Yes |
| Tonearm: |
Pro-Ject 9cc |
| Tonearm with Carbon Fiber Armtube: |
Yes |
| Overhang: |
18mm |
| Supplied Counterweight: |
Cartridge Weight 5- 7g, 7 - 10g, 9 - 11g, 10 - 14g |
| Downforce Range: |
10-35mN |
| Speed Variance: |
±0.5% |
| Wow & Flutter: |
±0.06% |
| Signal to Noise: |
-73dB |
| Platter Weight/Diameter |
3.5kg / 300mm |
| Power Supply: |
Outboard Power Supply |
| Output Voltage: |
16V / 500mA AC |
| Power Consumption: |
2W |
| Dimensions (W x H x D): |
17.4 x 7 x 12.8 in, 371 x 145 x 300mm |
| Weight: |
27.6 lbs., 10.5kg |
| Finish: |
Dark Grey Piano Lacquer Plinth |
|
