 |
|
The
YTER Speaker Cable
|
| Pairing
Silver (Ag) and Palladium (Pd) using a new three-phase fusion
process is the basic element of the alloy. The crystalline
homogeneity of the special alloy is the basis for the metallurgic
harmony found in our conductor, almost as if it were a metal
"tune". The result of this development is a speaker cable
that ensures metallurgical coherence in the path from the
amplifier to the speaker drivers.
It's
all in the process: Well Tempered Argentum Alloy All the processes
from the melting, to the drawing, and finally the manufacture
of the product, are exquisitely handcrafted at Laboratorium.
Speaker
cable pairs are available in standard 3 and 5 meter lengths,
with custom lengths available from a minimum of 6 meters to
a maximum of 11 meters. Allow a minimum of eight weeks for
delivery. |
|
The
YTER Interconnect
|
Single
conductor in Ag-Pd alloy, three phase melting process in electrostatic
balance with no sharp edges, Gaussian shape. Cold extrusion
in water bath, Dielectric with high-density polymer, RCA Silver
connectors from WBT. Standard length: 1 meter
All
the processes from the melting, to the drawing, and finally
the manufacture of the product are exquisitely handcrafted
at Laboratorium. |
|
The
YTER Balanced Interconnect
1
meter pair: |
| Three
conductor in Ag-Pd alloy, three phase melting process in electrostatic
balance with no sharp edges, Gaussian shape. Cold extrusion
in water bath. Dielectric with high-density polymer, Silver
XX series NC3FXX-BAG Neutrik XLR connectors. Standard length:
1 meter |
|
The
YTER Spade Adaptor Kit:
YTER
Spade Adaptor Kit: |
8
piece set of Silver-Palladium (Ag-Pd) spade adaptors for banana
plug connectors on Yter speaker wires.
8 piece sof Silver-Palladium (Ag-Pd) spade adaptors for banana
plug connectors on Yter speaker wires. |
|
